Send InquiryRavel RE 102 Conventional Fire Alarm Control Panel
Ravel RE 102 Conventional Fire Alarm Control Panel Specification
- Alarm Density
- One alarm per zone (multiple sensors per zone possible)
- Suitable For
- Small/medium residential, office, commercial premises
- Sensor Life
- Depends on detector type; typically 5-10 years
- Sensor Cable
- Suitable for 1.5 mm2 FRLS (max length per zone subject to voltage drop limits)
- Wireless
- No (fully wired system)
- Wireless Distance
- Not applicable (wired system)
- Working Current
- Up to 200mA (with active alarms)
- Control Distance
- As per wiring; each zone supports conventional wiring up to recommended limits
- Alarm time
- Continuous till reset
- Voltage
- 24V DC operating (from inbuilt SMPS)
- Alarm startup time
- <3 seconds (detection to indication)
- Standby Current
- <100mA (without alarm)
- Sensor Type
- Supports conventional smoke/heat detectors
- Sensitivity
- Based on detector specifications (panel monitors detectors)
- Noise Level
- Panel <30 dB (acoustic alarms external)
- Power Supply
- 230V AC 15%, 50 Hz
- Alarm Light Color
- Red (on panel indication)
- Remote Control
- No (Front panel operation only)
- Detection Range
- Depends on connected detectors, typically up to 100m per zone with standard detectors
- Cable Entry
- Knockouts provided for cable entry
- Weight
- Approx. 5 kg (without batteries)
- Number of Zones
- 2 zones
- Dimensions
- Approx. 330 x 260 x 100 mm
- Operating Temperature
- 0C to +50C
- Battery Backup
- Provision for 2 x 12V sealed lead acid batteries (up to 7 Ah)
- Controls
- Mute, Reset, Test, Lamp Test buttons
- Panel Type
- Conventional Fire Alarm Panel
- Display
- LED indications for alarm, fault, power
- Output Relays
- Common Alarm, Fault & Supervisory relay outputs
- Enclosure
- Metal cabinet, wall mount
- Humidity
- 0-95% RH (non-condensing)
- Zone End of Line
- 4k7 Ohm resistor
Ravel RE 102 Conventional Fire Alarm Control Panel Trade Information
- Minimum Order Quantity
- 1 Unit
- Payment Terms
- Cash in Advance (CID)
- Supply Ability
- 100 Units Per Month
- Delivery Time
- 5-7 Days
- Main Domestic Market
- All India
More Products in Fire Alarm System Category
Addressable Ravel Moniti NX Fire Alarm System
Minimum Order Quantity : 1 Unit
Power Supply : 230V AC, 50Hz with backup battery support
Alarm startup time : < 5 seconds (to first notification)
Standby Current : Less than 200mA
Sensor Type : Addressable smoke, heat, multicriteria detectors
Alarm Light Color : Red (visual indicators on connected devices)
Avni Lcs Ravel Loop Card
Minimum Order Quantity : 1 Unit
Power Supply : 12V DC
Alarm startup time : <1 second
Standby Current : <25mA
Sensor Type : Electronic Loop Sensor
Alarm Light Color : Red
Ravel 4 Zone Fire Alarm Panel
Minimum Order Quantity : 1 Unit
Power Supply : 230V AC, 50Hz main supply
Alarm startup time : < 5 seconds
Standby Current : < 100mA (panel only)
Sensor Type : Compatible with conventional smoke & heat detectors
Alarm Light Color : Red (Panel LED indicators)
Send Inquiry
