Send InquiryRavel 4 Zone Fire Alarm Panel
Ravel 4 Zone Fire Alarm Panel Specification
- Noise Level
- N/A (electronic panel)
- Sensitivity
- As per connected detector type
- Standby Current
- < 100mA (panel only)
- Voltage
- 24V DC (system circuitry)
- Alarm time
- Continuous until reset/silenced
- Wireless
- No (conventional wired panel)
- Alarm Density
- N/A - depends on external detectors
- Alarm startup time
- < 5 seconds
- Control Distance
- Varies as per installation specifications
- Working Current
- ~150mA (alarm condition, panel only)
- Sensor Life
- Depends on detector; typically 5-10 years
- Suitable For
- Small to medium commercial & industrial premises
- Sensor Type
- Compatible with conventional smoke & heat detectors
- Sensor Cable
- 2-core, 1.5 sq.mm recommended
- Power Supply
- 230V AC, 50Hz main supply
- Alarm Light Color
- Red (Panel LED indicators)
- Remote Control
- No
- Detection Range
- Dependent on detector type and environment
- Zone End-of-Line Resistor
- 4.7k standard
- Relative Humidity
- 95% RH (non-condensing)
- Panel Enclosure
- Metal with lockable front door
- Output Relay Contacts
- 1A, 30V DC NO/NC contacts for both alarm and fault
- Compliance
- IS 2189, CE certified
- Operation Mode
- Automatic and manual panel operation
- Display
- LED/LCD Display with zone-wise status indications
- Dimensions
- ~345mm x 395mm x 100mm
- Alarm Output
- Internal sounder, relay output for external hooters
- Number of Zones
- 4 (individually monitored zones)
- Fault Indication
- Zone-wise fault monitoring and LED indication
- Battery Backup
- Supported, 2x 12V 7Ah Sealed Lead Acid batteries (not included)
- Weight
- Approx. 6.5 kg (without battery)
- Operating Temperature
- 0C to +50C
- Cable Entry
- Pre-punched knockouts for cable glands
Ravel 4 Zone Fire Alarm Panel Trade Information
- Minimum Order Quantity
- 1 Unit
- Payment Terms
- Cash in Advance (CID)
- Supply Ability
- 100 Units Per Month
- Delivery Time
- 5-7 Days
- Main Domestic Market
- All India
More Products in Fire Alarm System Category
Ravel RE 102 Conventional Fire Alarm Control Panel
Minimum Order Quantity : 1 Unit
Working Current : Up to 200mA (with active alarms)
Sensor Cable : Suitable for 1.5 mm2 FRLS (max length per zone subject to voltage drop limits)
Detection Range : Depends on connected detectors, typically up to 100m per zone with standard detectors
Sensor Type : Supports conventional smoke/heat detectors
Suitable For : Other, Small/medium residential, office, commercial premises
Addressable Ravel Moniti NX Fire Alarm System
Minimum Order Quantity : 1 Unit
Working Current : 400600mA
Sensor Cable : Twisted pair, shielded (as per installation standard)
Detection Range : Up to 2000 meters (loop length dependent)
Sensor Type : Addressable smoke, heat, multicriteria detectors
Suitable For : Other, Commercial buildings, institutions, industrial complexes
Avni Lcs Ravel Loop Card
Minimum Order Quantity : 1 Unit
Working Current : <50mA
Sensor Cable : Compatible with standard loop wire
Detection Range : Up to 6 meters
Sensor Type : Electronic Loop Sensor
Suitable For : Other, Vehicle detection, automatic gates, traffic control, parking management
Send Inquiry
