Fire Alarm System

• Alarm Density
• N/A - depends on external detectors

• Alarm Light Color
• Red (Panel LED indicators)

• Alarm startup time
• < 5 seconds

• Alarm time
• Continuous until reset/silenced

• Control Distance
• Varies as per installation specifications

• Detection Range
• Dependent on detector type and environment

• Noise Level
• N/A (electronic panel)

• Power Supply
• 230V AC, 50Hz main supply

• Remote Control
• No

• Sensitivity
• As per connected detector type

• Sensor Cable
• 2-core, 1.5 sq.mm recommended

• Sensor Life
• Depends on detector; typically 5-10 years

• Sensor Type
• Compatible with conventional smoke & heat detectors

• Standby Current
• < 100mA (panel only)

• Suitable For
• Other, Small to medium commercial & industrial premises

• Voltage
• 24V DC (system circuitry)

• Wireless
• Other, No (conventional wired panel)

• Working Current
• ~150mA (alarm condition, panel only)

• Alarm Density
• One alarm per zone (multiple sensors per zone possible)

• Alarm Light Color
• Red (on panel indication)

• Alarm startup time
• <3 seconds (detection to indication)

• Alarm time
• Continuous till reset

• Control Distance
• As per wiring; each zone supports conventional wiring up to recommended limits

• Detection Range
• Depends on connected detectors, typically up to 100m per zone with standard detectors

• Noise Level
• Panel <30 dB (acoustic alarms external)

• Power Supply
• 230V AC 15%, 50 Hz

• Remote Control
• Other, No (Front panel operation only)

• Sensitivity
• Based on detector specifications (panel monitors detectors)

• Sensor Cable
• Suitable for 1.5 mm2 FRLS (max length per zone subject to voltage drop limits)

• Sensor Life
• Depends on detector type; typically 5-10 years

• Sensor Type
• Supports conventional smoke/heat detectors

• Standby Current
• <100mA (without alarm)

• Suitable For
• Other, Small/medium residential, office, commercial premises

• Voltage
• 24V DC operating (from inbuilt SMPS)

• Wireless
• Other, No (fully wired system)

• Wireless Distance
• Not applicable (wired system)

• Working Current
• Up to 200mA (with active alarms)

• Alarm Density
• Varies by device and configuration

• Alarm Light Color
• Red (visual indicators on connected devices)

• Alarm startup time
• < 5 seconds (to first notification)

• Alarm time
• Continuous until reset or fault cleared

• Control Distance
• Loop-based, up to 2 km per loop

• Detection Range
• Up to 2000 meters (loop length dependent)

• Noise Level
• < 30 dB (panel operation)

• Power Supply
• 230V AC, 50Hz with backup battery support

• Remote Control
• Other, Supported via panel interface and optional modules

• Sensitivity
• Adjustable as per sensor type (with panel settings)

• Sensor Cable
• Twisted pair, shielded (as per installation standard)

• Sensor Life
• Typical 8 to 10 years (sensor dependent)

• Sensor Type
• Addressable smoke, heat, multi-criteria detectors

• Standby Current
• Less than 200mA

• Suitable For
• Other, Commercial buildings, institutions, industrial complexes

• Voltage
• 24V DC (internal electronics)

• Wireless
• Other, No (wired addressable system)

• Wireless Distance
• Not applicable (wired system)

• Working Current
• 400-600mA

• Alarm Density
• High (up to industrial standards)

• Alarm Light Color
• Red

• Alarm startup time
• <1 second

• Alarm time
• Configurable

• Control Distance
• Up to 100 meters

• Detection Range
• Up to 6 meters

• Noise Level
• <70dB

• Power Supply
• 12V DC

• Remote Control
• Other, Supported

• Sensitivity
• Adjustable

• Sensor Cable
• Compatible with standard loop wire

• Sensor Life
• >5 years

• Sensor Type
• Electronic Loop Sensor

• Standby Current
• <25mA

• Suitable For
• Other, Vehicle detection, automatic gates, traffic control, parking management

• Voltage
• 12V-24V DC

• Wireless
• NO

• Working Current
• <50mA