Send InquiryAddressable Ravel Moniti NX Fire Alarm System
Addressable Ravel Moniti NX Fire Alarm System Specification
- Voltage
- 24V DC (internal electronics)
- Wireless Distance
- Not applicable (wired system)
- Sensor Type
- Addressable smoke, heat, multi-criteria detectors
- Alarm time
- Continuous until reset or fault cleared
- Suitable For
- Commercial buildings, institutions, industrial complexes
- Sensitivity
- Adjustable as per sensor type (with panel settings)
- Alarm startup time
- < 5 seconds (to first notification)
- Control Distance
- Loop-based, up to 2 km per loop
- Sensor Life
- Typical 8 to 10 years (sensor dependent)
- Alarm Density
- Varies by device and configuration
- Wireless
- No (wired addressable system)
- Standby Current
- Less than 200mA
- Sensor Cable
- Twisted pair, shielded (as per installation standard)
- Noise Level
- < 30 dB (panel operation)
- Working Current
- 400-600mA
- Power Supply
- 230V AC, 50Hz with backup battery support
- Alarm Light Color
- Red (visual indicators on connected devices)
- Remote Control
- Supported via panel interface and optional modules
- Detection Range
- Up to 2000 meters (loop length dependent)
- Display
- LCD backlit display for event and system status
- Panel Enclosure
- Wall-mount, metal enclosure with key lock
- User Interface
- Membrane keypad for programming and user control
- Communication Ports
- RS485, optional networking modules and printer port
- Operating Temperature
- 0C to 50C
- Event Log
- Built-in, up to 999 events
- Standards Compliance
- IS/EN 54-2, EN 54-4
- Number of Devices
- Up to 254 addressable devices per loop
- Zones/Loops
- Supports multiple addressable loops (typically 1-4 loops per panel)
- Battery Backup
- 12V sealed maintenance-free batteries, up to 24 hours standby
Addressable Ravel Moniti NX Fire Alarm System Trade Information
- Minimum Order Quantity
- 1 Unit
- Payment Terms
- Cash in Advance (CID)
- Supply Ability
- 100 Units Per Month
- Delivery Time
- 5-7 Days
- Main Domestic Market
- All India
More Products in Fire Alarm System Category
Ravel RE 102 Conventional Fire Alarm Control Panel
Minimum Order Quantity : 1 Unit
Standby Current : <100mA (without alarm)
Sensor Cable : Suitable for 1.5 mm2 FRLS (max length per zone subject to voltage drop limits)
Working Current : Up to 200mA (with active alarms)
Noise Level : Panel <30 dB (acoustic alarms external)
Remote Control : Other, No (Front panel operation only)
Avni Lcs Ravel Loop Card
Minimum Order Quantity : 1 Unit
Standby Current : <25mA
Sensor Cable : Compatible with standard loop wire
Working Current : <50mA
Noise Level : <70dB
Remote Control : Other, Supported
Ravel 4 Zone Fire Alarm Panel
Minimum Order Quantity : 1 Unit
Standby Current : < 100mA (panel only)
Sensor Cable : 2core, 1.5 sq.mm recommended
Working Current : ~150mA (alarm condition, panel only)
Noise Level : N/A (electronic panel)
Remote Control : No
Send Inquiry
